Publicidad
Idiomas disponibles
Idiomas disponibles
EN
User Instructions uLam1.0
The information below is important. To avoid
any problems please read this information
carefully before using the machine.
Always position the machine on a solid
work surface near an easily accessible
power socket.
Leave enough free space at the back of
the machine to allow the laminated docu-
ment to exit easily.
Do not laminate sharp or metal objects
such as staples and paperclips.
To avoid electric shocks, the laminator
must only be used indoors in dry condi-
tions, and water must never be allowed
to come into contact with the machine,
the connection cable or the socket.
Do not use the machine if the connection
cable is damaged.
Do not place next to sources of heat or in
direct sunlight.
Only use laminating pouches designed
specifically for hot lamination.
The laminator is designed for occasional
small office and home use and is not in-
tended for commercial or industrial appli-
cations.
After 2 hours of operation turn the ma-
chine off and allow to cool down for at
least 30 minutes.
Description
OFF / HOT switch
1
Power indicator lamp
2
Indicator lamp "Ready"
3
Slot for pouch input (front)
4
Slot for pouch exit (rear)
5
4
uLam_1.0_Laminiergeraet_Content.indd 4
Lamination
1. Turn the machine on by setting the switch
to the "HOT" position. The red "Power"
1
indication lamp
will now glow.
2
2. The laminator has reached its operating
temperature as soon as the green "Ready"
indicator
light glows.
3
3. Place the document to be laminated into
a laminating pouch of the appropriate
size. Make certain that all corners of the
document have at least two millimetres of
space to the edge of the laminating
pouch.
4. Slide the laminating pouch, sealed side
first, slowly into the pouch input slot
Guide the pouch into the laminator until it
is gripped and transported by the rollers.
5. The completed laminated pouch will exit
slowly from the pouch exit slot
results remove the laminated item and
place on a flat surface to cool. Take care
when touching hot laminated pouches.
6. If a pouch is pulled in at an angle or jams
inside the appliance then take the follow-
ing steps:
a. Turn the machine off which will prevent
the laminating pouch from being pulled
any further inside the laminator.
b. Remove the laminate pouch by hand.
c. Restart the lamination process.
For best results use Pfeiffer 3 Mil / 75 Mic or
80 Mic Laminating Pouches.
.
4
. For best
5
14.12.15 12:42
Publicidad
