Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
10 Troubleshooting
10 Troubleshooting
In the event of a fault or faulty operation, the control system issues warnings and alarms.
• Warnings are shown on the display.
• Alarms are shown on the display and immediately interrupt the welding process.
DANGER
Risk of injury and machine damage when handled by unauthorized persons
Incorrect repair work and changes of the product may lead to significant injuries and damage to the device. The product
warranty will be rendered invalid if work is carried out on the product by unauthorized persons.
• Operating, maintenance, cleaning and repair work may be carried out only by qualified personnel
(in Germany see TRBS 1203).
Refer to section 14 Warnings and error messages (status) in the operating instructions for the service software.
Please observe the attached document 'Warranty'. Please consult your retailer or the manufacturer in case of any doubts
and/or problems.
EN - 10
MF Control
BAL.0532.0 • 2018-08-16
Publicidad
Capítulos
Tabla de contenido
