Setting The Date/Time - HealthSmart PREMIUM SERIE Manual Instrucciones De Uso

SETTING THE DATE / TIME
Select the appropriate user bank.
1. When the unit is OFF, press the SET button to enter into the user
mode. The User 1 symbol will begin to flash, Fig. 1.
2. Press the MEMORY button to select User 1 or User 2 and move
into the date/time setting. Press SET to confirm.
NOTE: Setting the date / time for User 1 will automatically keep the
same date / time for User 2.
Setting the Date / Time
3. The year will begin to flash Fig. 2.
4. Press the MEMORY button to change until the desired number
appears.
NOTE: To scroll through the numbers quicker, hold down the
MEMORY button.
5. Press SET to confirm.
6. The date followed by the hour and minutes will blink. Repeat
steps 4 and 5 to adjust the date/time setting.
7. After setting the minutes, select the desired date format by
pressing the MEMORY button to switch between "US" for
standard date and 12-hour formatting or "EU" for standard
European date and 24-hour formatting, Fig. 3.
8. Press SET to confirm.
NOTE: You will now automatically enter into the Voice Setting
and Volume Control mode. Please see page 14 to continue
the setup.
/
/
Fig. 3
13
Fig. 1
Fig. 2
/