Operating Environment; For Europe - PIONEER DJ DDJ-SB3 Manual De Instrucciones

WARNING
This equipment is not waterproof. To prevent a fire or shock
hazard, do not place any container filled with liquid near
this equipment (such as a vase or flower pot) or expose it to
dripping, splashing, rain or moisture.
WARNING
To prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.

Operating Environment

Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light).
When using this product, confirm the safety information
shown on the bottom of the unit.
WARNING
Store small parts out of the reach of children and infants. If
accidentally swallowed, contact a doctor immediately.
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which requires
repair will be charged for even during the warranty
period.
The graphical symbol
alternating current.
The graphical symbol
direct current.
The graphical symbol
Class II equipment.
For Europe and other areas
CAUTION
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
This product is evaluated in moderate and tropical
climate condition.

For Europe

If you want to dispose this product, do not mix it with general
household waste. There is a separate collection system for
used electronic products in accordance with legislation that
requires proper treatment, recovery and recycling.
2
En
D3-4-2-1-3_A1_En
D3-4-2-1-7a_A1_En
D3-4-2-1-7c*_A2_En
D3-4-2-2-4_B1_En
D41-6-4_A1_En
K041_A1_En
placed on the product means
placed on the product means
placed on the product means
D3-4-2-1-1_B1_En
Private households in the member states of the EU, in Switzerland and
Norway may return their used electronic products free of charge to
designated collection facilities or to a retailer (if you purchase a similar
new one).
For countries not mentioned above, please contact your local authorities
for the correct method of disposal.
By doing so you will ensure that your disposed product undergoes the
necessary treatment, recovery and recycling and thus prevent potential
negative effects on the environment and human health.
For U.S.A. and other areas
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and
receiver.
— Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV
technician for help.
Information to User
Alterations or modifications carried out without
appropriate authorization may invalidate the user's right
to operate the equipment.
FEDERAL COMMUNICATIONS COMMISSION
DECLARATION OF CONFORMITY
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Product Name:
Model Number:
Responsible Party Name:
PIONEER ELECTRONICS (USA) INC.
SERVICE SUPPORT DIVISION
Address: 2050 W. 190th Street, Suite 100, Torrance,
CA 90504, U.S.A.
Phone: 1-310-952-2915
URL: pioneerelectronics.com
K058b_A1_En
D8-10-1-2_A1_En
D8-10-2_A1_En
DJ Controller
DDJ-SB3
D8-10-4*_C1_En