Bosch AHS 400 - 24T Instrucciones De Servicio página 13

Environmental Protection
The machine minimizes environmen-
tal impact because it runs at a low
noise level.
The machine has been assembled in
an environmentally responsible way.
Recycle raw materials instead of
disposing as waste.
Machine, accessories and packaging
should be sorted for environment-
friendly recycling.
These instructions are printed on re-
cycled paper manufactured without
chlorine.
The plastic components are labelled
for categorized recycling.
When the time comes to dispose of this product,
please consider the environment and take it to a rec-
ognized recycling facility (please contact your local
authority for location information).
Service
Exploded views and information on spare parts
can be found under:
www.bosch-pt.com
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
Middlesex UB 9 5HJ
Service
................................
Fax Service
...............................
Advice line
.........................
Fax
................................................
Ireland
Beaver Distribution Ltd.
Greenhills Road
Tallaght-Dublin 24
Service
.....................................
Fax
.....................................................
13 • 2 609 932 392 • 04.01
+44 (0) 18 95 / 83 87 82
+44 (0) 18 95 / 83 87 89
+44 (0) 14 49 / 74 20 20
+44 (0) 14 49 / 67 42 43
+353 (0)1 / 45 15 211
+353 (0)1 / 45 17 127
English - 5
Australia
Robert Bosch Australia Ltd.
RBAU/SPT2
1555 Centre Road
P.O. Box 66 Clayton
3168 Clayton/Victoria
...................................................
Fax
...................................................
www.bosch.com.au
E-Mail: CustomerSupportSPT@au.bosch.com
New Zealand
Robert Bosch Limited
14-16 Constellation Drive
Mairangi Bay
Auckland
New Zealand
........................................................
Fax
........................................................
Declaration of Conformity
Measured values determined according to
2000/14/EC (1.60 m height, 1 m distance away) and
EN ISO 5349.
Typically the A-weighted noise level of the product
is: sound pressure level 82 dB (A) (AHS 400-24T/
480-24T/550-24ST/600-24ST/650-24ST), 84 dB (A)
(AHS 6000/7000 PRO-T); sound power level
93 dB (A) (AHS 400-24T/480-24T/550-24ST/600-
24ST/650-24ST),
95 dB (A) (AHS 6000/7000 PRO-T).
The typical hand/arm vibration is below 2.5 m/s
We declare under our sole responsibility, that this
product is in conformity with the following standards
or standardized documents: EN 774, EN 50 144 ac-
cording to the provisions of the directives
89/336/EEC, 98/37/EC, 2000/14/EC.
2000/14/EC: The guaranteed sound power level
L is lower than 96 dB (A) (AHS 400-24T/480-24T/
WA
550-24ST/600-24ST/650-24ST), 98 dB (A) (AHS
6000/7000 PRO-T). Conformity assessment proce-
dure according to Annex V.
Leinfelden, 01.10.2003.
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Subject to change without notice
+61 (0)1 / 800 804 777
+61 (0)1 / 800 819 520
+64 (0)9 / 47 86 158
+64 (0)9 / 47 82 914
2
.
Dr. Eckerhard Strötgen
Head of Product
Certification