Auto Mode - Gabarron ECOMBI PLUS Serie Instrucciones De Instalacion Y Uso

Acumulador digital inteligente
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION MODES SELECTION
AUTO MODE – Temperature Level
Press
, the operation modes are displayed, with the selected one flashing.
Use
or
to select the desired operation mode. Confirm with
The heater has three different operation modes: Auto, Manual override and
Standby Mode.
-
Auto: The setpoint temperature varies according to the weekly
schedule setup in the unit. 3 different temperature levels (Comfort,
Moon and Frost Protection) can be selected for each time interval (1
hour) to adjust the temperature in the room to the habits and needs of
the different users.
-
Manual Override: the storage heater will maintain the temperature
set point and will ignore the pre-set program.
-
Standby Mode: the storage heater doesn't maintain any set
temperature or run any programs, keeping the time settings configured
previously.
To modify the set temperatures within the program permanently, press and
release
until the display shows the flashing temperature symbol
Now press
to select the temperature you want to change, COMFORT or
ECONOMIC. Use
and
You can temporary change the set temperature for the time period too. To do
this, increase or decrease the current temperature simply by pressing
. Once the time period finishes, the temperature will revert back to the
programmed set temperature.
24
to select the desired temperature.
.
.
and

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Eco158 plusEco208 plusEco308 plusEco408 plus

Tabla de contenido