Sonnet eGFX Breakaway Puck Guia De Inicio Rapido página 4

Mac Setup Overview
To support an eGFX Breakaway Puck, your Mac must be running the required minimum
(or later) version of macOS; Sonnet recommends using macOS Mojave (or later), as it offers
more features and greater stability. The drivers that support the Puck are installed as part of
macOS. As a result, the Puck is ready to use when connected to your computer.
1. If you are connecting displays to the Puck, do so now. Please note, macOS Mojave
10.14.2 or later is required for the Puck to accelerate graphics on the built-in display of an
iMac , MacBook Air
®
Support Notes:
connect the Puck to one of the left-hand Thunderbolt 3 ports for maximum data
throughput.
For optimal performance, the Puck should be connected directly to your Mac and not daisy-
chained through another Thunderbolt device.
2. Connect the included power cord between a wall outlet or power strip and the
power adapter, and then connect the power adapter cable to the Puck's power
socket. Note that the Puck's power indicator will not light until the computer is
turned on.
3. Connect the included Thunderbolt cable, or a comparable Thunderbolt 3 (40Gbps)
cable, between the Thunderbolt 3 port on the Puck and a Thunderbolt 3 port on
your computer. Cables marked with the USB icon (
4. If you haven't already done so, turn on your computer. With the Puck connected
to your Mac, the eGPU icon
recognized and ready for use.
, or MacBook Pro .
® ®
If you're using a 2016 or 2017 13-inch MacBook Pro, always
will appear in the menu bar, indicating the Puck is
) are NOT compatible.
4