Connecting The Water Hose To The Refrigerator; Connecting The Water Line To The Water Supply; Adjusting The Legs; Changing The Illumination Lamp - Beko BFBF3018SS Manual Del Usuario

Connecting the water hose to
the refrigerator
1. Slip the union (b) onto the water
hose (a).
2. Push the water hose downwards
firmly to slip it onto the water inlet valve
(c).
3. Tighten the union (c) by hand to
secure it onto the water inlet valve.
C
Normally, you are not required to
tighten the union with a tool. However,
you can use a spanner or pliers to
tighten the union if there is a leakage
Connecting the water line to
the water supply
Connect the water line to a water sup- -
ply valve. If a valve is not present or
you are not sure, consult a qualified
plumber.

Adjusting the legs

If your refrigerator is unbalanced;
You can balance your refrigerator
by turning its front legs as illustrated
in the figure. The corner where the
leg exists is lowered when you turn
in the direction of black arrow and
raised when you turn in the opposite
direction. Taking help from someone to
slightly lift the refrigerator will facilitate
this process.
Changing the illumination
lamp
To change the Bulb/LED used for
illumination of your refrigerator, call
your Authorized Service.
Changing the door opening
direction
A
This product's doors could not be
reversible.
12
EN