Water Connection; Connecting The Water Hose To The Refrigerator - Beko CN151121DX Manual Del Usuario

Ocultar thumbs Ver también para CN151121DX:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Water connection

Depending on the model of the
refrigerator, you can connect it either to
a demijohn or water mains.
First you must connect the water hose
to the refrigerator.
In cases where a demijohn is used, a
separate pump must also be used.
WARNING: Refrigerator and the
pump, if any, must be unplugged
during connection.
Following parts may not be supplied
with your product since they are not
required when using a demijohn.
Check that following parts have been
delivered together with the product:
1.Union for connecting the water hose
to the rear of the refrigerator
2.3 pieces of pipe clips (used to secure
the water hose)
3.5-meter long water hose (1/4 inch in
diameter)
4.Cold mains water valve with mesh
filter (tap adapter)
5.External water filter. (If there is
a demijohn connection; it is not
necessary to use a water filter.)
1
2
3
4
*5
Connecting the water hose
to the refrigerator
1.Slip the union (b) onto the water
hose (a).
2.Push the water hose downwards
firmly to slip it onto the water inlet valve
(c).
3.Tighten the union (c) by hand to
secure it onto the water inlet valve.
Normally, you are not required to
tighten the union with a tool. However,
you can use a spanner or pliers to
tighten the union if there is a leakage.
13
EN
a
a
b
2
1
c

Publicidad

Tabla de contenido
loading

Tabla de contenido