Optional Installation - Pentair Water GreatWhite Guía De Instalación Y Usuario

8

Optional Installation

Vac Port Installation with Vacuum Regulator in Skimmer
If your pool has a vac port (Figure 15), you can install Great White using the
1. Turn the pool pump off
2. Adjust valves for vacuuming
Adjust the pump valves (if your system has valves) to direct all suction to the dedicated vacuum line and the
skimmer. Close the main drain and all suction lines, except the line from the dedicated vacuum line to which
Great White will be connected, and the skimmer where the vacuum regulator will be installed.
3. Install vac port door fitting
WARNING! Suction entrapment, injury, and drowning hazard. If your pool has
a dedicated suction port ("vac port") for vacuuming or for an automatic pool
cleaner, it must be covered when not in use.
A spring loaded safety cover (the "vac port fitting") is included with this pool cleaner
(Figure 16). Install it on the dedicated vacuum line to prevent entrapment and injury. For
details please refer to the Vac Port Instruction sheet included with your vac port fitting.
To install the included vac port fitting:
1. Screw the vac port fitting into the dedicated vacuum line opening.
2. Orient the vac port fitting so the arrow on the door points up.
3. Secure the cover by tightening the allen-screw below the door, into the dedicated
vacuum line fitting.
4. Remove the skimmer basket from the skimmer
Great White Installation and User's Guide
Vac Port
Figure 15
.
Optional Installation
Figure 16