Packing And Transport - Benassi BL 6000 Manual De Uso

To identify the machine (serial number, engine, weight, power) have a look at the number plate put on the machine
as in
(Picture 1 Ref. "A").
Take the machine out of the carton box.
• Fit the two tilling units to the main shaft using the delivered pins already assembled on the tilling units.
• Fit the arm with spur in its place using the delivered pin.
• Fix the handlebar to the handlebar support using the parts already assembled on the handlebar support itself.
The small wheel holder is fitted to the frame by means of a screw nut and a splint pin.
• Fit the two guard-extensions to the main tiller protections fitted on the body of the machine using the proper screws
and nuts. The protection guards should reach a width of 60 cm according to the CE requirements.
• During the transport the handle can be left unassembled by means of the threaded bush that fix it to the handlebar
support. The tiller is equipped with a front handle (see Pict.4 Ref. "A") in order to be able to lift and to transport the
machine easily.
CE MARK

PACKING AND TRANSPORT

40
BL 6000