Before First Use - Domo DO9210AV Manual De Instrucciones

www.domo-elektro.be
products (such as acids, alkaline, etc.) or any corrosive
detergents to clean the appliance. Do not immerse.
• In case of water infiltrations into the appliance, unplug
the diffuser immediately and leave it to dry for at least
3 days before reusing it.
COMPONENTS

BEFORE FIRST USE

Insert the adaptor's connector into the DC jack input at the back side of the diffuser.
1. Place the diffuser on a flat and stable surface and away from the edge.
2. Remove the diffuser's cover.
3. Pour mineral water (bottled or tap water) into the water tank up to the maximum level
indicated (165 ml).
4. Then add a few drops of essential oils (3-6 drops) or home fragrance (5-10 drops) to the
water tank.
5. Place the cover on the diffuser.
6. Plug the adaptor into the outlet.
AC/DC adaptor
Water spout
Air outlet
Line marking the maximum water
level
Empty the water using the water
spout, on the left of the air outlet.
Do not empty the water in the
air outlet, this could damage the
diffuser.
31
DO9210AV
Mist outlet
Cover
Base
ON/OFF button
Connector
Water tank
Ceramic disc