Fein CCG18-115 BL Instrucciones De Uso página 20

OBJ_BUCH-0000000284-001.book Page 20 Tuesday, November 21, 2017 12:14 PM
en
20
Working instructions.
Before mounting or replacing application tools or accessories, remove the bat-
WARNING
tery. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
For each job, use only the FEIN application tool released and intended for the respective
application.
Switching on and off.
Always hold the power tool
CAUTION
firmly. Otherwise, you could
lose control over the power tool.
CCG18-115 BL (**)/CCG18-125 BL (**)
(figure 9).
Switching on:
Press and push the On/Off switch forward (I).
Switching off:
Press the switch downward ().
The self-start lock prevents the cordless
angle grinder from automatically restarting
again after a power interruption, e.g., after
changing the battery. In this case, switch the
power tool off, remove it from the workpiece
and check the application tool. Afterwards,
switch the power tool on again.
Fig. 9
On/Off switch
1.
2.