Maintenance; Warranty - SPARKY P 382 Instrucciones De Uso

Cleaning the bag: Empty the dust bag by unzipping
the lever lock located on the bottom of the bag and tap
it gently to remove dust. On occasion, slip the bag off
of the frame and turn bag inside out. Brush dust off of
the lining using a soft brush.
4. A workshop dust extraction system or a household
vacuum cleaner can be connected to the adaptor
tube (15) for the efficient removal of dust and shavings
permitting a safer and cleaner working environment.
DRIVE BELT REPLACEMENT
WARNING: Always ensure that the tool is
switched off and unplugged from the power supply
before making adjustments or installing or removing
blades.
1. To replace the drive belt first take out the four cross-
head screws that secure the drive belt cover on the
left-hand side of the planer as viewed from the rear
(Fig. 18).
2. Remove the damaged belt and use a soft brush to
clean the pulleys and the surrounding area.
NOTE. Wear eye protection when cleaning out the pul-
ley area.
3. With the three continuous "V" profiles on the inside,
place the new belt over the bottom pulley. Half fit the
other end of the belt on the top pulley then roll the belt
in place whilst turning the pulley.
4. Check that the belt runs evenly by manually turning
the belt.
5. Replace the cover and the four fixing screws.
6. Replace the electrical plug and run the planer for a
minute or two to make sure that the motor and belt are
operating correctly.
ACCESSORIES
Parallel guide; spare driving belt; spare set of 3 blades;
dust bag; spanner. This planer can operate with any
commercially available standard 82 mm wide blade.
To achieve best results use only original SPARKY
PROFESSIONAL ТСТ / HSS planer blades.

Maintenance

WARNING: Always ensure that the tool is
switched off and unplugged before attempting to per-
form inspection or maintenance.
Regularly check that all the fixing screws are tight. They
may vibrate loose over time.
Re-lubricate all moving parts at regular intervals.
BRUSH REPLACEMENT
When the carbon brushes are worn out, both brushes
must be replaced simultaneously with genuine brushes
8
EN
at SPARKY service centre for warranty and post-war-
ranty service.
CLEANING
For safe operation always keep the machine and its ven-
tilation slots clean.
Regularly check to see if any dust or foreign matter has
entered the grills near the motor and around the switch-
es. Use a soft brush to remove any accumulated dust.
Wear safety glasses to protect your eyes whilst cleaning.
If the body of the tool needs cleaning, wipe it with a soft
damp cloth. A mild detergent can be used.
WARNING: Never use alcohol, petrol or other
cleaning agent. Never use caustic agents to clean
plastic parts.
WARNING: Water must never come into con-
tact with the tool.
IMPORTANT! To assure product safety and reliability,
repairs, maintenance and adjustment (including brush
inspection and replacement) should be performed by
certified service centres or other qualified service or-
ganisations, always using genuine replacement parts.

Warranty

The guarantee period for SPARKY power tools is deter-
mined in the guarantee card.
Faults due to normal wear, overloading or improper han-
dling will be excluded from the guarantee.
Faults due to defective materials implemented as well as
defects in workmanship will be corrected free of charge
through replacement or repair.
The complaints for defective SPARKY power tools will
be recognized if the machine is sent back to the dealer
or is presented to the authorised warranty service centre
undismantled, in its initial condition.
Notes
Carefully read the entire original instructions before us-
ing this product.
The manufacturer reserves the right to make changes
and improvements to the products and to alter specifica-
tions without prior notice.
Specifications may differ from country to country.
P 382