Makita AF505 Manual De Instrucciones página 6

ENGLISH
1. Safety glasses
2. Face shield
3. Pneumatic tool oil
4. Adjuster
5. Hook
6. Protrusion
SPECIFICATIONS
Dimensions (L X H X W)
Min. hose diameter
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
............... Read instruction manual.
................ Wear safety glasses.
................ Do not use on scaffoldings, ladders.
6
Explanation of general view
7. Nose adapter
8. Place for storage
9. Air fitting
10. Air socket
11. Exhaust cover
12. Latch
Model
Air pressure
Nail Iength
Nail capacity
Net weight
END106-1
13. Contact top
14. Contact arm
15. Drain cock
16. Air filter
17. Oiler
18. Pneumatic oil
0.39 - 0.78 Mpa (3.9 - 7.8 bar)
15 mm - 50 mm
100 pcs.
260 mm X 64 mm X 237 mm
IMPORTANT SAFETY
INSTRUCTIONS
WARNING: WHEN USING THIS TOOL, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO
REDUCE THE RISK OF PERSONAL INJURY,
INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS.
• For personal safety and proper operation and
maintenance of the tool, read this instruction manual
before using the tool.
• Always wear safety glasses to protect your eyes from
dust or nail injury.
WARNING:
• It is an employer's responsibility to enforce the use of
safety eye protection equipment by the tool operators
and by other persons in the immediate working area.
For Australia and New Zealand only
Always wear safety glasses and face shield to protect
your eyes from dust or nail injury. The safety glasses and
the face shield should conform with the requirements of
AS/NZS 1336.
WARNING:
It is an employer's responsibility to enforce the use of
safety eye protection equipment by the tool operators and
by other persons in the immediate working area. (Fig. 1)
• Wear hearing protection to protect your ears against
exhaust noise and head protection. Also wear light but
not loose clothing. Sleeves should be buttoned or
rolled up. No necktie should be worn.
• Rushing the job or forcing the tool is dangerous.
Handle the tool carefully. Do not operate when under
the influence of alcohol, drugs or the like.
• General Tool Handling Guidelines:
(1) Always assume that the tool contains fasteners.
(2) Do not point the tool toward yourself or anyone
whether it contains fasteners or not.
AF505
6.5 mm
1.4 kg
ENB100-2