Remote Control (Optional); Cleaning The Filters - Faber INCA LUX GLASS EV8 X/BK A70 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
MAINTENANCE

REMOTE CONTROL (OPTIONAL)

The appliance can be controlled using a remote control powered
by a 1.5 V carbon-zinc alkaline batteries of the standard LR03-
AAA type (not included).
• Do not place the remote control near to heat sources.
• Used batteries must be disposed of in the proper manner.
• Open the Panel by pulling it.
• Clean the outside with a damp cloth and neutral detergent.
• Clean the inside using a damp cloth and neutral detergent; do
not use wet cloths or sponges, or jets of water; do not use
abrasive substances.
These can be washed in the dishwasher, and need to be cleaned
whenever the S1 Led comes on or at least once every 2 months
use, or more frequently if use is particularly intensive.
Resetting the alarm signal
• Turn the Lights and the Suction Motor off.
• Press T3 and hold for at least 3 seconds, until LED flashes
three times in confirmation.

Cleaning the Filters

• Open the doors.
• Remove the Filter, pushing it towards the back of the unit and
at the same time pulling downward.
• Wash the filter without bending it, and leave it to dry
thoroughly before replacing (if the surface of the filter changes
colour over time, this will have absolutely no effect on its
efficiency).
• Replace, taking care to ensure that the handle faces forwards.
• Close the doors again.
EN
Opening Panel
Metal grease filters
CLEANING THE FILTERS
1
12
2

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Inca lux glass ev8 x/bk a52Inca lux glass ev8 x/wh a70Inca lux glass ev8 x/wh a52

Tabla de contenido