Remote Control; Control Panel - Faber STRATUS NB Instrucciones De Instalación

The remote control is powered by a CR2032 type 3 V battery
(not included).
• Do not place the remote control near heat sources.
• Do not discard the batteries with normal waste, they must be
put into the specific containers
Motor On/Off.
-
-
Lights On / Off.
Press for 2 seconds to Activate Dimmer.
Activates/Deactivates Intensive operation
Brief pressure: Activates/Deactivates the Delay function: automatic switch-off with a 30'
delay. The display shows the operating speed and the dot at the bottom right flashes once
a second.
Increases the working speed each time it is pressed
Decreases the working speed each time it is pressed

REMOTE CONTROL

.

Control panel

26