Tristar SM-6000 Manual De Usuario página 19

Winding of the bobbins
Figure 1. Place a yarn pin on the spool pin (no.1).
Guide the thread through the winding thread guide (no.2) to the empty bobbin.
Place the bobbin winding pin (no.18) on the machine.
Wind the thread several times clockwise to the empty bobbin and place it on the
bobbin winding pin (no.18).
Figure 2. Turn the hand wheel (no. 11) clockwise until the thread is tightened.
Start electric winding by pressing the foot control.
When the bobbin is full, release the foot pedal, cut the thread, then remove bobbin
Reverse sewing.
Reverse sewing is suitable for fastening the seam when start seam or finish seam to avoid
stitches loose. Stop the machine firstly, then press the reserve sewing lever (no.10), the
machine can sew reverse. Release the reserve button, the machine can recover to sew
forward. The reverse trace shouldn't beyound 5 cm.
18