Noise/Vibration Information; Declaration Of Conformity - Bosch GOP 250 CE Professional Manual Original

OBJ_BUCH-1271-006.book Page 15 Friday, April 29, 2016 9:48 AM

Noise/Vibration Information

Sound emission values determined according to EN 60745-2-4.
Typically the A-weighted noise levels of the product are
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
Sanding:
a
h
K
Sawing with plunge cut saw blade:
a
h
K
Sawing with segment saw blade:
a
h
K
Scraping:
a
h
K
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work
patterns.
Bosch Power Tools
GOP 250 CE
dB(A) 81
dB(A) 92
dB
2
m/s
2
m/s 1.5
2
m/s 10
2
m/s 1.5
2
m/s 6.5
2
m/s 1.5
2
m/s 4.5
2
m/s 1.5

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards: EN 60745-1, EN 60745-2-4,
EN 50581.
Technical file (2006/42/EC) at:
Robert Bosch Power Tools GmbH, PT/ETM9,
70538 Stuttgart, GERMANY
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017
Assembly
Changing the Tool
 Before any work on the machine itself, pull the mains
plug.
 Wear protective gloves when changing application
tools/accessories. Contact with the application tool/
accessory can lead to injuries.
English | 15
GOP 300 SCE
79
90
3 3
2 3
1.5
10
1.5
5
1.5
5
1.5
1 609 92A 2PJ | (29.4.16)