Settings On The Roadside Panel(S) - CFI EXTEL IRON Instrucciones De Uso

b. Settings on the roadside panel(s)
- If you notice that the camera lens is not correctly aligned when installing the monitor and the intercom panel in
their final positions, you can compensate for this misalignment when wiring by moving the camera horizontally and
vertically and/or turning the direction of the camera.
Caution, you can only compensate by a few centimetres in height.
- 2 settings are accessible in the roadside panel:
- On the upper left side, setting of the sound level for the speaker of the roadside panel.
- On the upper right side, setting of the sound level for the speaker of the monitor.
To change the settings, use a small screwdriver and turn it carefully without force to the abutments..
c. Visiophone settings
To access the visiophone settings menu, press the
•Video settings:
To access the video settings, select "Video" and press
You can configure the video settings by pressing
your settings by pressing
- «Brightness»
- «Contrast»
- «Color»
•Audio settings:
To access the audio settings, select "Audio" using the
You can configure the audio settings by pressing
your settings by pressing
- «Main Volume»
, navigate in the menus using keys
:
,navigate in the menus using keys
:
CFI EXTEL IRON - 05/2011 - V1
key (or the key for the additional monitor).
.
, key, and press
and
.
and
, validate
,validate
6GB