Roadstar RCR-4650USMP Manual De Instrucciones página 6

3. To repeat the entire disc, press the MODE button (11) three times. REP ALL will appear
on the display.
4. Press the MODE button 3 times more to cancel all disc repeat. The indicator
disappears from the display.
RANDOM PLAY IN MP3
1. Press the PLAY/PAUSE button (17) and after press the MODE button (11) 3 times to
enter the Random mode. "RAND" appears on the display, then press PLAY/PAUSE
button (17) to start playback in Random order.
2. Press SKIP UP button (13) to go to next Random track.
3. Press the MODE button once more to return to the Normal Playback mode.
PROGRAMMED PLAYBACK FOR CD/USB AND MMC/SD CARD
IN CD
1. Press the PLAY/PAUSE button (17) and after 5 seconds the STOP button (19).
2. Press the MODE button (11). The track number "P-01" will appear and "PROG" will
appear on the display indicating the first selection.
3. Press SKIP DN ( ) or SKIP UP ( ) button to select the desired track to be programmed.
The track number which will be programmed will appears on the display.
4. Press once the MODE button (11) to enter the track into memory. "P-02" will appear.
5. Repeat the steps 3 and 4 to program up to 20 tracks.
6. Press PLAY/PAUSE ( II) button (10) once to start programmed playback.
7. To cancel programmed playback, press the STOP button (19) twice.
Note: During program playback, if you wish to repeat the entire programmed playback,
press the MODE button (11) repeatedly until the "REP" indicator appears on the
display.
ANTI-SHOCK FUNCTION
• If in use, the player is likely to receive shocks or vibrations (i.e. whilst walking or in a
moving vehicle), The ANTI-SHOCK function is active to provide uninterrupted playback
when power on.
• Should the player receive shocks for more than 10 seconds continuously in CD playback
or 35 seconds in MP3 playback, the sound can mute for a very short while and will
resume once the player has stabilised from the shock.
7
English
Notes:
•
•
CASSETTE OPERATION
INSERTION AND REMOVAL OF CASSETTES
1.
2.
3
4
PLAYBACK
1.
2.
3.
4.
5
8
English
The Anti-shock function will not correct the errors arising from the use of defective
scratched or dirty discs.
IMPORTANT! During CD/MP3 playback, the ANTI-SHOCK function is always ON and
this function can not be disactivated.
Press the Stop/Eject Button (22) to open the Cassette Door.
Slip your cassette tape into the holder with the exposed side facing up (the side for
playing faces you).
Close the Cassette Doors securely before starting.
When finished playback, press the Stop/Eject Button to open the Cassette Door, and
retrieve your cassette tape.
Set the Function Selector (9) to the TAPE position.
Insert your cassette tape with the exposed side facing up.
Press the Play Key (25) to activate playback.
Set the Volume to the desired level.
Press the Stop/Eject Key (22) when finished.