cecotec CONGA 899 SLIM Manual De Instrucciones página 19

QUICK GUIDE
Setting the charging base
• Connect the adapter to the charging base.
• Place the charging base in a flat surface against the wall.
• Do not put any obstacle on its right or left sides within 1m or in front within 2 m. To keep a smooth
signal reception, do not put a mirror or any other obstacle with a reflecting surface nearby.
• Connect to power supply.
NOTE:
• Please make sure that the power switch has been turned on. Otherwise, the machine will not
be able to operate and be charged.
• If the light is green and emits an alarm sound when being charged, it indicates that the
bottom power switch of the machine has not been turned on and the machine cannot be
properly charged.
• Please make sure that the power switch is on before charging. Otherwise, the machine will
not be properly charged.
• If the machine is not to be used for a long time, please charge the machine completely, turn
off the power switch, remove the battery and store it in ventilated and dry places.
Side brush installation
Place the side brushes at the bottom of the appliance as shown in the image. Please, make sure
they are in place.
Furniture bottom lower than 8cm may stuck the product, please raise the
furniture if that area needs cleaning.
A protection barrier should be used on double layer stairs to make sure that
the product works safely.
ENGLISH
CONGA 899 SLIM 19