Dometic Heki 2 de Luxe Instrucciones De Montaje página 10

Using the Heki2 de Luxe
➤ Hold the bracket in the middle and move it out of the original position (B).
➤ Tilt it downwards.
➤ Push the glass dome upwards (C).
Opening the glass dome is supported by the two gas springs after approx.
150 mm.
➤ Open both the latches (D).
➤ Tilt the bracket to the half-way position.
➤ Pull the glass dome down until the bracket is lying in the holders.
➤ Secure the bracket with both latches.
To close it, follow the instructions in the reverse order.
8.3 Opening in the continuous ventilation position
(fig. e)
➤ Press the latches on both rotary bolts and turn them 90° (A).
➤ Push the glass dome upwards with both hands approx. 2 cm on both rotary
bolts.
➤ Turn the rotary bolt into the position provided for this (B).
To close it, follow the instructions in the reverse order.
Closing the roller blind (fig. f)
8.4
A
NOTICE! Risk of damage due to a build-up of heat between the
roller blind and the window.
In strong sunlight, only close the blackout roller blind two thirds of the
way. Open the glass dome into the "continuous ventilation" position.
➤ Take hold of the recessed grip on the rod and pull it towards the rod on the other
side with the pivot until they both click into one another.
➤ Select the required position by moving the two latched-roller blinds at the same
time
10
Heki2 de Luxe
EN