Information Notices; Product Information - Hilti DD 150-U Manual De Instrucciones Y Operación

1.4

Information notices

On the drill stand, base plate and diamond core drilling machine
1.5

Product information

products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Type:
Generation:
Serial no.:
*2204401*
On the drill stand and on the vacuum base plate
Upper half of the image: An additional means of securing the drill stand
must be employed when the machine is used for horizontal drilling with the
vacuum securing method.
Lower half of the image: Use of the vacuum securing method without
an additional means of securing is prohibited for drilling in an upward
direction.
On the diamond core drilling machine
Use of the water collection system in combination with a wet-type industrial
vacuum extractor is mandatory for upward wet drilling.
On the diamond core drilling machine
This product is equipped with Bluetooth (optional).
2204401
DD 150-U
DD 150-U
03
English 3