Hilti DD 150-U Manual De Instrucciones Y Operación página 19

Drilling performance
indicator: Optimum contact
pressure
Rated current limit has
been exceeded
Drilling performance
indicator: Contact pressure
is too high
Status bar for information
Status bar for warning
messages
Bluetooth ON
Bluetooth OFF
Connection has been
established
*2204401*
The diamond core drilling machine is drilling and the hole-starting mode is
not active. The information displayed helps ensure that the diamond core
drilling machine is being operated in the optimal range.
• Background color: Green.
Contact pressure is at the optimum level.
The diamond core drilling machine is drilling and the hole-starting mode is
not activated. Rated current has exceeded the limit of 20 A.
• Contact pressure is too high. Reduce the contact pressure.
The diamond core drilling machine is drilling and the hole-starting mode
is not activated. The information displayed helps ensure that the diamond
core drilling machine is being operated in the optimal range.
• Background color: Red.
Contact pressure is too high. Reduce the contact pressure.
The status bar displays various information regarding the machine's current
status, such as the gear engaged or the activated hole-starting mode.
The status bar displays various warnings regarding the tool's current
status which do not result in the diamond core drilling machine stopping
immediately.
Bluetooth is activated in the basic setting.
To switch off the Bluetooth function, press and hold down the buttons
and simultaneously for 10 seconds with the motor switched off.
• This information is shown in the display only for a few seconds.
Bluetooth is deactivated. The diamond core drilling machine cannot be
connected to additional device or accessories.
•
To switch on the Bluetooth function, press the buttons
simultaneously with the motor switched off.
The diamond core drilling machine is ready to connect to another device or
accessory.
To start the process of establishing the connection, simultaneously press
the and buttons and hold them down for at least 1 second.
• The time frame for the connection to another device is 2 minutes. When
the 2 minutes have expired, the connection process will be canceled.
The paired connection between another device or accessory and the
diamond core drilling machine is sustained until:
• The diamond core drilling machine is paired to a device or accessory of
the same type.
• Bluetooth is switched off.
2204401
and
English 11