ZEKLER 412 RDB Instrucciones De Uso página 12

Change of hygiene kit (pic. E)
1. Remove the old sound absorber foam and insert the new
2. Pull off the old ear cushion
3. Centre the new ear cushion over the hole
4. Press with a finger along the outside of the ear cushion until it attaches all around the edges
5. (only for headband models) Pull off the old head cushion and insert the new
Important!
Earmuffs, and in particular cushions, may deteriorate with use and should be examined at
frequent intervals for cracking and leakage.
Hygiene kit should be changed at least twice per year. Make sure you choose the correct hygiene kit for your
hearing protector. (B:1)
Approval and technical data (see table F)
F:1) Headband
F:2) Helmet mount
F:3) Tested and certified to (standards)
F:4) Weight
F:5) Mean attenuation
F:6) Standard deviation
F:7) Assumed Protection Value
F:8) Tested and certified by (notified body)
F:9) Electrical input level (3,5 mm AUX)
F:10) Size
Approved helmet combinations
These earmuffs should be fitted to, and used only with the industrial safety helmets listed in table G.
G:1) Manufacturer
G:2) Model
G:3) Adapter
G:4) Warning! These helmet mounted hearing protectors are suitable for persons with medium to large head
size circumference (56-64 cm) and with medium to large height from the top of the head to the centre of
the ear canal. A smaller height may lead to improper fit and reduce the hearing protector´s noise attenuation
properties.
Earmuffs complying with EN 352-3 are of medium size range or small size range or large size range.
Medium size range earmuffs will fit the majority of wearers. Small size range or large size range earmuffs are
designed to fit wearers for whom medium size range earmuffs are not
suitable.
12