Before Use; General Safety Precautions - Unitekno TABLE 900 Manual De Uso

BEFORE USE

Before using the machine for the first time, please read the information
contained in this booklet carefully and completely. It explains how to install,
use, and maintain the machine. Please keep this manual in a safe place
and pass it along to any future owners of the machine.
This product has been manufactured to comply with all current safety stan-
dards for electrical devices. More specifically, it complies with EU standards
2006/95/CE (Electromagnetic Compatibility) and 2004/108/CEE (Low
Voltage Directive), and therefore, it bears the EC mark.
The manufacturer reserves the right to make any type of modification
without advanced notice.
If you lose you can view and / or download this manual from the website
www.unitekno.com

GENERAL SAFETY PRECAUTIONS

Do not use this machine and the iron if there are signs of damage (cracks,
breaks), if the power cord is damaged, or if you suspect that there may be
an internal defect (for example, after the machine has fallen) and if you see
any leaks.
For domestic use only.
If the power cord is damaged, a manufacturer-authorised service centre
must replace it since a special tool is needed to access it.
Read the rating-plate located under the machine; make sure the voltage
and input ratings comply with the system's capacity.
Plug the machine into a grounded outlet.
While moving the machine, avoid tugging on the power cord.
Disconnect the machine from the electrical power source by pulling
the plug. Do not disconnect it by pulling on the cord, since this could
damage the machine.
Remove the power supply plug from the socket before putting the water in
the boiler, after use and for manteinance.
13