Turning On/Off - Peaq PHP350BT-B Manual De Instrucciones

ENGLISH
Operation

TURNING ON/OFF

Turn on
Press and hold the
onds until the LED lights up in green.
Turn off
Press and hold the
onds until the LED flashes up in red.
WEARING THE HEADPHONE
Adjust the headband and headphone for the
best fit.
26
PHP350BT_B/W_IM_02.indb 26
PAIRING
Before you use the headset with a mobile
phone/music device for the first time, you
have to pair both devices.
1. Activate the Bluetooth function of the
mobile phone/music device.
2. Ensure that the headset is charged and
turned on.
3. Press and hold
flashing blue.
button for 2 sec-
The headset is in pairing mode, which
takes around 5 seconds.
button for 2 sec-
4. Pair the headset with the mobile phone.
For details, refer to the user manual of
the mobile phone. Under Bluetooth
menu on the mobile phone, search for
the headset. From the found devices,
select PEAQ.
Enter "0000" (4 zeros), if prompted to en-
ter the pin code of the headset.
Note
For details, refer to the user manual of the
mobile phone/music device.
CLEAR PAIRING
To clear the pairing settings from the head-
phone set switch off the headphone. In off
mode press
ton ( – ) for around 8 seconds, until the LED
alternates in red, blue and green.
until the LED starts
and the volume down but-
9/28/12 6:00 PM