Connecting To The Camera - JVC CU-VD20 Manual De Instrucciones

Connections
Hard Disk Camera
F
To DC Connector

Connecting to the Camera

A Connect the AC adapter to the burner.
B Connect the power cord to the AC adapter.
C Connect the power cord to an AC outlet.
D Connect the provided USB cable to the USB connector of the burner.
E Connect the camera to an AC outlet. (
F Turn on the camera.
G Press the power button
(C /B) on the front to turn on the burner. The power lamp lights in green.
H Connect the provided USB cable to the USB connector of the camera.
NOTES:
● Insert a disc after [INSERT DISC] is displayed on the camera.
● Be sure to use the provided USB cable to connect the burner and the camera.
● When using a camera, make sure the power is provided with the AC adapter, not the battery.
● Do not subject the camera or burner to vibration or mechanical shock while writing to a disc. Be especially careful if the camera is placed
on the burner during writing.
● Refer to "Dubbing Video Files To DVD Discs" in the manual for writing discs.
● The DVD discs that are written with this unit cannot be played with some DVD recorders/players. In that case, use [PLAY DVD] of the
camera to playback discs.
Connecting to PC
A Connect the AC adapter to the burner.
B Connect the power cord to the AC adapter.
C Connect the power cord to an AC outlet.
D Press the power button
(C /B) on the front to turn on the burner.
The power lamp lights in green.
E Turn on the PC.
F Connect the burner to the PC with the USB cable.
NOTE:
To connect the burner to a PC, use the USB cable provided with the camera.
H
USB Cable (Provided)
AC Adapter (provided for the camera)
Refer to the instruction manual for the camera.)
AC Adapter
(provided for the burner)
G
D
Rear of burner
A
To USB Connector
B
Power Cord
(Provided)
C
To AC Outlet
E
Power Cord
AC Adapter
(provided for the burner)
USB Cable
(provided for the camera)
EN 5