Writing Software - Cyberlink Power2Go 5.5 Lite; System Requirements; Cyberlink Power2Go 5.5 Lite Contact Information - JVC CU-VD20 Manual De Instrucciones

Writing Software — CyberLink Power2Go 5.5 Lite —
Power2Go 5.5 Lite is software for writing video, image, audio, and
other data files to data DVDs.

System Requirements

The following shows the system requirements for installation.
®
Operating Windows XP Home Edition [XP] (pre-installed) or
®
system Windows XP Professional [XP] (pre-installed)
®
Intel Pentium
CPU
®
(Intel Pentium
Free hard disk At least 50 MB for installation
space At least 5 GB recommended for making DVDs
RAM At least 128 MB (at least 256 MB recommended)
Connector USB 2.0/1.1* connector
Display Must be capable of displaying 800 x 600 dots
* If you use USB1.1 cable, it will take approximately 3 hours to write.
Installation Procedure
1.
Insert the installation CD-ROM in the CD-ROM drive.
2.
The language selection screen
appears.
3.
The installation start screen
appears.
Click [Next].
4.
Confirm the contents and then
click [Yes].

CyberLink Power2Go 5.5 Lite Contact Information

For information on CyberLink Power2Go 5.5 Lite or other products, use the following contact information.
Telephone/fax support
Location
Germany English / German / French /
Spanish / Italian / Dutch
Taiwan
Paid voice support
Location
U.S.A.
Support web/e-mail
Language
English
German / French / Spanish / Italian
6 EN
®
III, at least 800 MHz
®
4, at least 2 GHz recommended)
Language Office hours (Mon. to Fri.)
Mandarin
Language Lines are open (Mon. to Fri.)
English
http://www.cyberlink.com/english/cs/support/new_site/support_index.html
5.
Enter the user information and
then click [Next].
Follow the on-screen instructions.
6.
Installation starts.
7.
The screen on the right appears
when the installation is complete.
Select the desired checkbox and
then click [Finish].
● If you select [No, I will restart
my computer later.], the setup
complete screen in step 8.
appears.
8.
Click [Finish].
The installation is now finished.
NOTES:
● The above procedure is just a brief explanation on installing the
software. For details on operating Power2Go 5.5 Lite, refer to the
User's guide, Help, and ReadMe installed at the same time as the
software. You can view the User's guide, Help, and ReadMe from
the start menu of the PC.
● This product does not apply to write files into CD-R or CD-RW.
Also, it is not responded to all the functions of Power2Go 5.5 Lite.
● To get customer support and to register the software, you need
the following product key (CD-Key):
PXNVM-NWE4G-XQD9Q-CU9DX-3FQFN-NAKUS
● Power2Go 5.5 Lite does not support conversion of audio files to
MP3 format.
● When the [Enter Activation Key] screen appears while using
Power2Go 5.5 Lite, close the screen without entering the
activation key.
9:00 am to 5:00 pm
9:00 am to 6:00 pm
1:00 pm to 10:00 pm CST
URL/e-mail address
goCyberlink@aixtema.de
Phone #
+49-700-462-92375 +49-241-70525-25
+886-2-8667-1298 +886-2-8667-1300
ext. 333
URL
http://www.cyberlink.com/english/cs/support/
new_site/voice_support.jsp
Fax #