Control Elements; Installing The Radio Link; Tools Required - Dometic PERFECTVIEW VT 150DIG Instrucciones De Montaje

VT150DIG
5.2

Control elements

You will find the following control elements on the transmitter module:
No. in
fig. 6, page 5
1
2
3
4
5
6
7
The receiver module has the following control elements:
No. in
fig. 7, page 5
1
2
3
4
6

Installing the radio link

6.1

Tools required

For installation and assembly, you will need the following tools:
Drill bit set (fig. 1 1, page 3)
•
Electric drill (fig. 1 2, page 3)
•
Screwdriver (fig. 1 3, page 3)
•
Set of ring or open-ended spanners (fig. 1 4, page 3)
•
EN
Meaning
Antenna connection
Pairing button
Operating mode display:
•
red LED glows when the transmitter module is powered
•
blue LED flashes when the components are being paired
Camera connection
Green cable (REVERSE TRIGGER): Control cable for activating the
camera
Red cable (DC INPUT): Connection to the positive terminal of the
voltage supply; preferably ignition plus
Black cable (GND): Connection to the negative terminal of the voltage
supply or earth
Meaning
Antenna connection
Pairing button
Operating mode display:
•
red LED glows when the transmitter module is powered
•
blue LED flashes when the components are being paired
Monitor connection
Installing the radio link
11