FreshJet
9.14
Setting the time
The remote control needs the current time in order to program the timer. The time is
indicated on the display of the remote control.
Perform the following steps to set the time:
I
NOTE
The remote control returns to its initial mode and saves the current
setting, if no key is pressed on the remote control for 15 seconds while
setting the time.
➤ Press and hold the
✓ The time flashes on the display of the remote control.
➤ Use the + or – button to set the current time.
Press the + or – button longer than 2 s to increase or decrease the time quicker
➤ Press the SET button to confirm the time.
9.15
Setting the winter mode (for models with heating
mode only)
The winter mode is a special heating mode that starts at a temperature of 7 °C and
stops when the temperature rises above 10 °C which helps avoid icing inside the
vehicle during the storage.
➤ Press both buttons on the control panel board for 5 s to activate the winter mode.
✓ The LED flashes green/yellow.
✓ All other functions are deactivated.
➤ To deactivate the winter mode press the
off the air conditioner.
EN
button for 2 s.
Operating the roof air conditioner
button on the control panel to turn
33