POLTI Vaporetto SV205 Manual De Instrucciones página 21

3. CLEANING HARD FLOORS
Ensure that the points in Sections 1 and 2 have
been followed.
3.1 Turn the ignition/steam-adjustment dial
clockwise, from the "OFF" position to one of
the three steam-adjustment positions; for this
type of surface, we recommend the maximum
steam level.
The "steam ready" indicator light will come on
to indicate that the appliance is on (heating).
WARNING: If the ignition/steam-adjustment
dial (E) has been turned from the "OFF" po-
sition, by inserting the handle tube in the
coupling hole, the appliance will start to
emit steam. Always face the appliance
downwards, not directing it towards people,
animals or objects.
3.2 About 30 seconds after it has been turned
on, the appliance will start to dispense steam
3.3 Clean the floors by moving the brush.
WARNING: Do not
without the cloth.
WARNING: To remove the cloth from the
brush, turn the ignition/steam-adjustment
dial to the "OFF" position, unplug the power
supply from the electric socket and wait a
few minutes to allow the cloth to cool.
4. CLEANING DELICATE FLOORS
Before using the appliance on delicate surfa-
ces, ensure that the part in contact with the
surface is free from foreign bodies that
could cause scratches.
Ensure that the points in Sections 1 and 2 have
been followed.
4.1 Turn the ignition/steam-adjustment dial
clockwise, from the "OFF" position to one of
the three steam-adjustment positions; for this
type of surface, use the minimum steam level.
The "steam ready" indicator light will come on
to indicate that the appliance is on (heating).
WARNING: If the ignition/steam-adjustment
dial (E) has been turned from the "OFF" po-
sition, by inserting the handle tube in the
coupling hole, the appliance will start to
emit steam. Always face the appliance
downwards, not directing it towards people,
animals or objects.
4.2 About 30 seconds after it has been turned
on, the appliance will start to dispense steam
4.3 Clean the floors by moving the brush.
use the appliance
WARNING: Do
without the cloth.
WARNING: To remove the cloth from the
brush, turn the ignition/steam-adjustment
dial to the "OFF" position, unplug the power
supply from the electric socket and wait a
few minutes to allow the cloth to cool.
5. CLEANING WOODEN FLOORS
Before using the appliance on delicate surfa-
ces, ensure that the part in contact with the
surface is free from foreign bodies that
could cause scratches.
Ensure that the points in Sections 1 and 2 have
been followed.
5.1 Turn the ignition/steam-adjustment dial
clockwise, from the "OFF" position to one of
the three steam-adjustment positions; for this
type of surface, use the minimum steam level.
The "steam ready" indicator light will come on
to indicate that the appliance is on (heating).
WARNING: If the ignition/steam-adjustment
dial (E) has been turned from the "OFF" po-
sition, by inserting the handle tube in the
coupling hole, the appliance will start to
emit steam. Always face the appliance
downwards, not directing it towards people,
animals or objects.
5.2 About 30 seconds after it has been turned
on, the appliance will start to dispense steam
5.3 Clean the floors by moving the brush.
WARNING: Do
without the cloth.
WARNING: To remove the cloth from the
brush, turn the ignition/steam-adjustment
dial to the "OFF" position, unplug the power
supply from the electric socket and wait a
few minutes to allow the cloth to cool.
WARNING: For additional safety, test steam
delivery on a hidden part, leave the steamed
part to dry to ensure that no changes in co-
lour or deformation have occurred.
6. CLEANING RUGS AND CARPETS
Before using the appliance on delicate surfa-
ces, ensure that the part in contact with the
surface is free from foreign bodies that
could cause scratches.
| 19 |
not use the appliance
not use the appliance