Operation; Filling The Boiler Tank During Use - Easy Home 4133 Manual Del Usuario

USA

Operation

− The cloth cover can be put onto the fabric brush for the cleaning of
11
delicate surfaces.
− The glass wiper
14
cleaning of smooth surfaces.
Operation
1. Fill the boiler tank with water (see chapter "Filling the boiler tank").
2. Connect the power cord
The power indicator light
steam to be ready.
3. If the safety lock
17
cleaner to unlock it (see Fig. G).
4. Press the steam button
5. When cleaning is done, release the steam button.
6. Slide the safety lock towards the rear end of the cleaner to lock the steam
button. This can prevent accidental activation of the steam button.
7. Disconnect the power cord and allow the cleaner to cool down completely.

Filling the boiler tank during use

DANGER!
Risk of electric shock!
Never unscrew the safety cap unless you are sure that the he safety ca e safety
cleaner has been unplugged from the power socket. een unplug een unplu
Removing the safety cap during use Remov Removin
If the steam pressure inside the boiler tank is the the
too high, the safety cap cannot be unscrewed
or removed. Let the cleaner cool down for a few
minutes before trying again.
When no steam will come out after you have pressed the steam button, the
water in the boiler tank may have run out. To refill the boiler tank:
1. Disconnect the power cord
2. Press the steam button
boiler tank while pointing the steam jets into a suitable container.
3. Let the cleaner cool down for a few minutes.
18
info@electra-craft.com
can be attached to the fabric brush (see Fig. F) for the
to a power socket.
5
will turn on. Wait for about 3-4 minutes for the
6
has been engaged, slide it towards the front end of the
to release steam.
2
tion of the ste
he cleaner to clea
ank duri nk dur
ck! k!
of the cleaner.
5
2
to release the remaining pressure from the
e fro e fro
.
he cleaner to he cleaner to
of the s
AFTER SALES SUPPORT
USA
800-223-1898