Installing The Battery Refresher; Using The Battery Refresher; Maintaining And Cleaning The Battery Refresher; Warranty - Dometic BR 12 Instrucciones De Montaje

PerfectBattery BR12
6

Installing the Battery Refresher

➤ Attach the Battery Refresher using one of the two options here:
– Stick it to the required place such as the battery, using the double-sided adhesive tape
included in the scope of delivery.
– Screw the Battery Refresher to a wall with 3 mm screws (not to the battery).
A
NOTICE!
Observe the polarity.
Reversing the polarity of the connections can damage the Battery Refresher.
I
NOTE
You do not need to remove the terminals for connecting the Battery Refresher from the
battery poles.
➤ Connect the black cable (–) with the cable lug to the negative terminal of the battery.
➤ Connect the red cable (+) with the cable lug to the positive terminal of the battery.
7

Using the Battery Refresher

The Battery Refresher switches on automatically if the battery voltage is above 12.8 V. The green
LED lights up.
If the battery voltage drops below 12.6 V, the Battery Refresher switches off. The green LED goes
out.
8

Maintaining and cleaning the Battery Refresher

A
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning as these may damage
the product.
➤ Occasionally clean the product with a damp cloth.
9

Warranty

The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the addresses) or
your retailer.
For repair and guarantee processing, please include the following documents when you send in
the device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
EN
Installing the Battery Refresher
7