Troubleshooting - TFA Dostmann METEO SENS Instrucciones De Uso

TFA_No. 35.1139_Anleitung 11.04.2017
METEO SENS - Wireless weather station

10. Troubleshooting

Problem Solution
➜ Ensure the batteries' polarity are correct
No display
➜ Change the batteries
➜ No transmitter installed
No transmitter reception
➜ Check the transmitter batteries (do not use rechargeable batteries!)
Display "---""
➜ Restart the transmitter and the base station according to the manual
➜ Start manual search for the outdoor transmitter(s):
Press the CHANNEL button on the base station for three seconds and
then the TX button in the transmitter's battery compartment
➜ Choose another place for the transmitters and/or the base station
➜ Reduce the distance between the transmitters and the base station
➜ Check if there is any source of interference.
➜ Activate DCF reception in setting mode
No DCF reception
➜ Press and hold the RCC/- button for three seconds and start the
initialization manually
➜ Wait for an attempt reception during the night
➜ Choose another place for your product
➜ Check if there is any source of interference.
➜ Restart the instrument according to the manual
➜ Set the clock manually
32
15:15 Uhr Seite 17
METEO SENS - Wireless weather station
➜ Change the batteries
Incorrect indication
➜ Restart the instrument according to the manual
11. Waste disposal
This product has been manufactured using high-grade materials and components which can be recycled
and reused.
Never dispose of empty batteries and rechargeable batteries in ordinary household waste.
As a consumer, you are required by law to take them to your retail store or to an appro-
priate collection site depending on national or local regulations in order to protect the
environment.
The symbols for the contained heavy metals are:
Cd = cadmium, Hg = mercury, Pb = lead
This product is labelled in accordance with the EU Waste Electrical and Electronic Equip-
ment Directive (WEEE).
Please do not dispose of this product in ordinary household waste. As a consumer, you
are required to take end-of-life devices to a designated collection point for the disposal of
electrical and electronic equipment, in order to ensure environmentally-compatible dis-
posal.
33