Cleaning And Maintenance - Bresser NATIONAL GEOGRAPHIC 90-80000 Instrucciones De Uso

SCOPE OF DELIVERY
Wall clock, Instruction manual
Required batteries: 1 x 1.5V battery (Size AA/LR6)
Batteries not included with purchase.
PARTS OVERVIEW
Wall clock (Fig. 2)
1. Dial plate
2. Clock hands (hours, minutes)
3. Wall mount
4. Battery compartment
5. Time setting dial
GETTING STARTED/POWER SUPPLY
NOTE!
Insert the batteries for the remote sensor fi rst and
then insert the batteries for the wall clock. Make sure
to place the batteries strictly according to the right
polarities (+/-) as shown in the battery compartment.
1. Remove the locking pin from the clockwork.
The clock can be operated only after the pin has
been removed.
2. Insert one battery (1.5V, AA/LR6) into battery
compartment (4).
TIME SETTING
1. After inserting the battery, the movement works
(hands move).
2. Turn the dial (5) to set the correct time.
MOUNTING/POSITIONING
NOTE!
Make sure you have mounted or placed the device in
a safe way. Otherwise the device may fall down and
heavy damages can occur for which the manufacturer
is not liable.
The wall clock can be mounted on walls with the wall
mount (3).

CLEANING AND MAINTENANCE

Before cleaning the device, disconnect it from the
power supply (remove batteries)!
Only use a dry cloth to clean the exterior of the device.
To avoid damaging the electronics, do not use any
cleaning fl uid.
Protect the device from dust and moisture. The
batteries should be removed from the unit if it has not
been used for a long time.
(Fig. 1)
DISPOSAL
Dispose of the packaging materials properly,
according to their type, such as paper or
cardboard. Contact your local waste-disposal service
or environmental authority for information on the
proper disposal.
Do not dispose of electronic devices in the
household garbage!
As per Directive 2002/96/EC of the European
Parliament on waste electrical and electronic
equipment and its adaptation into German law, used
electronic devices must be collected separately and
recycled in an environmentally friendly manner.
EC DECLARATION OF CONFORMITY
Bresser GmbH declares
that the device:
Art.No.: 90-80000: Wall clock
is in accordance with applicable guidelines and
corresponding standards of the 1999/5/EG directive
DE
EN
FR
IT
ES
5