Bresser NATIONAL GEOGRAPHIC 90-48500 Instrucciones De Uso página 19

Scope of supply (Fig. 1)
Solar Radio Lamp (A), Adapter cable with USB-A coupling
(B) Operating instructions
Parts overview (Fig. 2-5)
1. Metal carrying handle
2. Solar cells
3. Operating panel with buttons for
a. RADIO (Radio ON/OFF)
b. LIGHT (Light ON/OFF)
c. SCAN+ (Channel search upwards)
d. SCAN- (Channel search backwards)
e. VOL+ (Increase volume level)
f. VOL- (Reduce volume level)
4. Hand crank for generator
5. LED lamp
6. Loud speaker
7. DC-connection socket (DC Φ 3.5mm) for the supplied
adapter cable
8. Power switch ON/OFF
9. Adapter cable with 3.5mm DC-plug (a) and USB-A socket (b)
Operation
1. Charging the battery through solar cells
Make sure that the lamp and radio are turned off. Move
the power switch to ON position. Position the device in
the sun so that the solar cells (Fig. 3, 2) are provided with
sufficient sunlight. The energy thus generated is stored in
the built-in battery.
2. Charging the battery via the dynamo using the
crank handle
Make sure that the lamp and radio are turned off. Move
the power switch to ON position.
Fold out the hand crank (Fig. 4, 4) and turn it at a rate
of about 2.5 to 3 rotations per second. The energy thus
generated is stored in the built-in battery.
3. Charging of digital mobile devices
In the charging process described below, a value of 5V
for the output voltage (DC out) is obtained. The input
voltage of the mobile device to be charged must match
this voltage value.
- 19 -
EN