Rear - Sanyo MPX-CD163 Manual De Instrucciones

PART NAMES

Rear

(MPX-CD93)
CAMERA
1 2 3 4 5 6
IN
OUT
VCR MAIN VCR MAIN
IN OUT MONITOR MONITOR
IN OUT
S-VIDEO
1
Camera video input connectors (CAMERA IN 1 – 16)
Connect to the output connectors of the monitoring
cameras.
The MPX-CD93 model has nine input connectors.
2
Camera video output connectors (CAMERA OUT 1 – 16)
These are pass-through connectors that output camera
images to an external monitor.
The MPX-CD93 model has nine output connectors.
3
VCR S-Video input connector (S-VIDEO VCR IN)
4
VCR S-Video output connector (S-VIDEO VCR OUT)
5
Main monitor S-Video output connector (MAIN
MONITOR S-VIDEO OUT)
6
VCR input connector (VCR IN)
7
VCR output connector (VCR OUT)
8
Main monitor output connector (MAIN MONITOR)
9
Spot monitor output connectors (SPOT MONITOR 1 – 4)
F
Digital input connector (DIGITAL IN)
G
Digital output connector (DIGITAL OUT)
H
RS-485 control connectors (RS485 A/B)
I
RS-232C connector (RS232C)
This connector can be connected to the RS232C connector
of a computer using a D-Sub 9-pin cable (sold separately)
so that control of the multiplexer can be carried out by the
computer.
J
Sensor alarm output connector
(SENSOR ALARM OUT)
Outputs alarm signals when a camera that is connected to
one of the CAMERA IN connectors receives a sensor alarm.
The MPX-CD93 model has nine alarm input connectors.
K
All reset button (ALL RESET)
L
RS-485 termination switch (RS485 TERMINATE)
English
(MPX-CD163)
7 8 9
1 2
IN
OUT
SPOT MONITOR VCR
IN OUT
1 2 3 4
S-VIDEO
CAMERA
3 4 5 6 7 8 9 10
MAIN VCR MAIN SPOT MONITOR
MONITOR MONITOR
IN OUT 1 2 3 4
M
Control connector (CONTROL)
Pin
C
A
B
C
AL
C
R1
R2
C
SW
C
* Used for twisted-pair cable connection.
N
Alarm input connectors (ALARM IN 1 – 16)
If external alarm switches that are connected to these
connectors are turned on or off, an alarm is output from the
AL pin of the control connector.
The MPX-CD93 model has nine alarm input connectors.
O
Power cord holder
Secure the power cord to the holder using the accessory
cord tie as shown in the illustration.
P
Power socket (AC IN~)
Securely insert the accessory power cord into the power
socket, and insert the power cord plug into a wall outlet.
When the power cord is inserted into the wall outlet, the
POWER indicator and other indicators will illuminate.
– 7 –
11 12 13 14 15 16
ALARM IN
C 1 2 3 4 5
SENSOR
DIGITAL ALARM OUT
RS485
RS485
IN OUT A B RS232C
TERMINATE
ON
ALL
RESET
OFF
DO NOT CONNECT TO PHONE LINE
Signal
Ground
RS-485 connector*
RS-485 connector*
Ground
Alarm output (DC 5V)
Ground
Remote control input 1
Remote control input 2
Ground
Switch input (DC 5V)
Ground
AC IN
6 7 8 9 10 11 12 13 14 15 16
RS485 ALARM OUT REMOTE
C A B C C R1 R2 C C
CONTROL