Sharp LL-151-3D Manual De Funcionamiento página 25

The 3D image on the display appears blurred
and doubled.
- Confirm if the 3D display compatible software is
running.
- For software supporting SHARP 3D Technology
- Press the 3D button to enter 3D mode (the
power LED changes to blue).
- Confirm that screen resolution is set to
1024 x 768.
- When two or more users are logged on, let all
users log off, and then log on as the user who
logged on first.
- The best viewing position in 3D mode is the
position where the entire red strip (or its bottom)
appears darkest. Move your head slightly
up/down, right/left, and forward/backward to
adjust your position.
When it is in 3D mode, the screen appears a
little darker.
- In 3D mode, the screen appears a little darker
than in 2D mode. (This is not a malfunction.)
The mode cannot be switched to 3D mode by
pressing the 3D button.
- Does the current software support SHARP 3D
Technology? If you are using software that does
not support SHARP 3D Technology, refer to the
operation manual of the software.
Monitor care
25