CONTROLS AND FUNCTIONS
A VOLUME
Increases or decreases the sound output level.
Note
This does not affect the OUT (REC) level.
B INPUT selector
Selects the input source you want to listen to.
C A/B/C/D/E
Selects the preset station group (A to E) when TUNER is
selected as the input source (see page 22).
D PHONES jack
Outputs audio for private listening with your headphones.
Note
Press SPEAKERS A and B so that the SP A/B indicators turn off
before you connect your headphones to the PHONES jack.
E SPEAKERS A/B
Turns on or off the speaker set connected to the
SPEAKERS A and/or SPEAKERS B terminals on the rear
panel each time the corresponding button is pressed (see
page 15).
F BASS
Increases or decreases the low frequency response. The 0
position produces a flat response (see page 16).
G TREBLE
Increases or decreases the high frequency response. The 0
position produces a flat response (see page 16).
H BALANCE
Adjusts the sound output balance of the left and right
speakers to compensate for sound imbalances caused by
speaker locations or listening room conditions (see page
16).
I LOUDNESS
Retains a full tonal range at any volume level to
compensate for the human ears' loss of sensitivity to high
and low-frequency ranges at a low volume level (see page
16).
J Preset station number buttons
(1 to 8)
Selects the preset station number (1 to 8) directly when
TUNER is selected as the input source (see page 24).
4