PRESONUS SL-Dante-MIX Option Card Guía De Instalación Y Conexiones página 9

4. Select Update Dante Firmware.
5. Click Browse.
6. Browse the directory in which you
saved your firmware update files.
7. Select your mixer's Dante firmware.
The Firmware Update Manager will
now scan for devices on the network
that match the firmware update file.
Warning: If you have multiple StudioLive AI mixers
connected to your network, they must all be the same
model type to be connected simultaneously during this
process. If you have two or more different StudioLive AI
mixer models (for example, a StudioLive 32.4.2AI and
an RM32AI), only connect one at time. Only StudioLive
mixers of the same model should be connected to your
Dante network while installing custom firmware.
8. View the discovered Dante devices,
and select those you wish to update, by
clicking the associated checkboxes.
9. Click Start. Each device will be updated
in turn, taking 2-4 minutes per device.
As each mixer is updated, its Status
column will change to "Updating (n/m)".
When the mixer has finished updating,
the Status will change to "Done".
10. Power cycle the mixers that have
been updated to finish applying
the custom firmware.
SL-AVB-MIX Installation and Hookup Guide
7