Trotec BL 30 Manual De Instrucciones página 20

tended measurement. Therefore we strongly
recommend before performing such an in-
tensive measurement that you check the char-
ge capacity of the batteries and replace them if
necessary, in particular if the data are of parti
cular value or the measured values are critical.
Transmission of the data from the data logger to the PC
A . Connect the data logger to the USB port of your PC by
means of its USB interface .
B . Open the data logger software program if the program
is not already running
C . Click on the Download icon
D . The following window appears . Click on „Download" to
transfer the measured values to the PC
„Download"
B - 8
After successful transmission of the data, a window ap-
pears with the following graphic display:
The field above the graphic display contains information
on the time, sampling rate, number of data, alarm set-
„Cancel"
tings and the maximum, minimum and average values) .
operating instructions - climate data logger Bl30