7
P/n 14938-00
dO NOT INsERT BRANCHEs LARgER THAN 3 INCHEs
IN dIAmETER INTO CHIPPER.
OCCuR. REFER TO OWNERs mANuAL FOR OPERATINg
INsTRuCTIONs ANd RECOmmENdATIONs.
9
dO
NOT
OPERATE
EQuIPmENT IN THE vICINITy OF
BysTANdERs. dO NOT ALLOW
CHILdREN TO OPERATE THIs
EQuIPmENT.
OBTAIN
ANd
WEAR
gLAssEs ANd usE HEARINg
PROTECTION AT ALL TImEs WHEN
OPERATINg THIs mACHINE.
BEFORE
INsPECTINg
sERvICINg ANy PART OF THIs
mACHINE, sHuT OFF POWER
sOuRCE, dIsCONNECT sPARk
PLug WIRE FROm sPARk PLug
ANd mAkE suRE ALL mOvINg
PARTs
HAvE
COmE
COmPLETE sTOP.
mACHINE dAmAgE mAy
THIs
sAFETy
OR
TO
A
3 INCH CHIPPER/SHREDDERS
8
P/n 14703-00
LOWER LEvER sLOWLy TO ENgAgE CHIPPER.
LEvER uP TO dIsENgAgE CHIPPER.
sHREddER ROTOR WILL CONTINuE TO ROTATE WHEN
CLuTCH Is dIsENgAgEd. sTOP ENgINE ANd REmOvE
sPARk PLug WIRE BEFORE CLEANINg dEBRIs FROm
dIsCHARgE AREA OR sERvICINg THIs mACHINE. dO
NOT OPERATE WITHOuT dIsCHARgE sCREEN, INLET
FLAPs ANd ALL sHIELds IN PLACE.
P/n 14965-00
SAFETY
CHIPPER/
ALWAys
sTANd
CLEAR
dIsCHARgE
AREA
OPERATINg
THIs
mACHINE.
kEEP FACE ANd BOdy AWAy
FROm FEEd ANd dIsCHARgE
OPENINgs.
WHEN FEEdINg sHREddABLE
mATERIAL INTO CHIPPER, dO
NOT ALLOW mETAL, ROCks,
BOTTLEs, CANs OR ANy OTHER
FOREIgN mATERIAL TO BE FEd
INTO CHIPPER OR sHREddER.
BEFORE
INsPECTINg
sERvICINg ANy PART OF THIs
mACHINE, sHuT OFF POWER
sOuRCE, dIsCONNECT sPARk
PLug WIRE FROm sPARk PLug
ANd mAkE suRE ALL mOvINg
PARTs
HAvE
COmE
COmPLETE sTOP.
PuLL
OF
WHEN
OR
TO
A
7