Important Safety Information; Meanings Of Signal Words; Safety; Important Safety Instructions For Using All Power Tools - Metabo HPT C 12LCH Instrucciones De Manejo

Ingletadora
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT SAFETY INFORMATION

Read and understand all of the safety precautions, warnings and operating instructions in the Instruction
Manual before operating or maintaining this power tool.
Most accidents that result from power tool operation and maintenance are caused by the failure to observe
basic safety rules or precautions. An accident can often be avoided by recognizing a potentially hazardous
situation before it occurs, and by observing appropriate safety procedures.
Basic safety precautions are outlined in the "SAFETY" section of this Instruction Manual and in the sections
which contain the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine damage are identified by WARNINGS on
the power tool and in this Instruction Manual.
NEVER use this power tool in a manner that has not been specifically recommended by metabo HPT.

MEANINGS OF SIGNAL WORDS

WARNING
indicates a potentially hazardous situations which, if ignored, could result in death or serious
injury.
CAUTION
indicates a potentially hazardous situations which, if not avoided, may result in minor or moderate
injury, or may cause machine damage.
NOTE
emphasizes essential information.

IMPORTANT SAFETY INSTRUCTIONS FOR USING ALL POWER TOOLS

READ ALL OF THE WARNINGS AND OPERATING INSTRUCTIONS IN THIS MANUAL
BEFORE OPERATING OR MAINTAINING THIS TOOL:
WARNING:
When using this electric tool, take all necessary precautions to minimize the risk of electric
shock or other personal injury.
In particular, always comply with the following safety rules:
1. ALWAYS KEEP GUARDS IN PLACE
2. ALWAYS REMOVE ADJUSTING KEYS AND WRENCHES BEFORE STARTING TOOL.
Always confirm that all keys and adjusting wrenches have been removed from the tool before it is
turned on.
3. ALWAYS KEEP WORK AREA CLEAN.
benches.
4. NEVER USE TOOL IN HAZARDOUS ENVIRONMENTS.
wet places and never expose it to rain. Always keep the work area well lighted.
5. NEVER PERMIT CHILDREN OR OTHERS TO LOITER NEAR THE WORK AREA.
people (especially children) away from the work area. Always unplug unattended tools and keep the
work place tamper-proof by installing locks on the doors and on the master switches.
6. NEVER FORCE THE TOOL.
which it was designed.
7. ALWAYS USE THE RIGHT TOOLS.
was not designed.
8. ALWAYS WEAR PROPER APPAREL WHEN WORKING WITH THE TOOL.
clothing, gloves, neckties, rings, bracelets or other jewelry which may get caught in the moving parts.
Always wear non-slip footwear, preferably with steel toes. Wear protective hair covering to contain
long hair.

SAFETY

and in working order.
Avoid injuries by not cluttering the work areas and work
It will do the job better and more safely if it is operated at the rate for
Never force a tool or an attachment to do a job for which it
Never use the power tool in damp or
Never wear loose
English
Keep all
3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

C 12lcC 12fch

Tabla de contenido