Footswitch Battery; Battery Replacement - Chauvet DJ 4BAR Quad Guía De Referencia Rápida

EN

Footswitch Battery

The wireless footswitch uses a 9-volt battery located under the battery cover on the bottom of the product, which can be
replaced when necessary.

Battery Replacement

To replace the battery in the wireless footswitch:
1. Turn the power switch to the Off position.
2. Remove the battery cover by removing 2 screws with a Phillips-head screwdriver.
3. Remove the old battery from the housing and unplug it from the leads.
4. Replace with a new 9-volt battery, ensuring that the positive (+) and negative (-) leads correspond to the correct
electrodes on the battery.
5. Place the battery into the housing and cover with the battery cover.
6. Secure the battery cover with the 2 Phillips-head screws.
Do NOT over-tighten the screws!
DMX Values
19Ch
Channel Function
1 Auto Programs
2 Dimmer
Strobe
(when Ch. 1 is 000  009)
Auto Speed
3
(when Ch. 1 is 010  249)
Sound Sensitivity
(when Ch. 1 is 250  255)
4 Red 1
5 Green 1
6 Blue 1
7 Amber 1
8 Red 2
9 Green 2
10 Blue 2
11 Amber 2
12 Red 3
13 Green 3
14 Blue 3
15 Amber 3
16 Red 4
17 Green 4
18 Blue 4
19 Amber 4
5
QUICK REFERENCE GUIDE
Value Percent/Setting
000  009 No function
010  029 Auto program 1
030  049 Auto program 2
050  069 Auto program 3
070  089 Auto program 4
090  109 Auto program 5
110  129 Auto program 6
130  149 Auto program 7
150  169 Auto program 8
170  189 Auto program 9
190  209 Auto program 10
210  229 Auto program 11
230  249 Auto program 12
250  255 Sound-active program
000  255 0–100%
000  009 No function
010  255 Strobe, slow to fast
000  255 Program speed, slow to fast
000  010 Sound sensitivity off
011  255 Sound sensitivity on
000  255 0–100%
000  255 0–100%
000  255 0–100%
000  255 0–100%
000  255 0–100%
000  255 0–100%
000  255 0–100%
000  255 0–100%
000  255 0–100%
000  255 0–100%
000  255 0–100%
000  255 0–100%
000  255 0–100%
000  255 0–100%
000  255 0–100%
000  255 0–100%
4BAR Quad QRG Rev. 4