Unpacking And Setup; What's In The Box; Choosing A Location - NAD S170i Manual Del Usuario

UNPACKING AND SETUP

WHAT'S IN THE BOX

Packed with your S170i preamplifier you will find:
• A removable AC cable (if you wish, any IEC-standard AC cable of suitable wattage may be substituted)
• 1 DC trigger cable
• The HTR 2 Learning Remote controller with batteries (4 x AAA)
• The ZR 2 second zone remote controller with battery (1 x CR2025)
• A pair of white cotton gloves-for handling your S170i during setup without fear of scratches or
fingerprints
• This owner's manual
SAVE THE PACKAGING
Please save the box and all of the packaging in which your S170i arrived. Should you move or otherwise
need to transport your preamplifier, this is by far the safest container in which to do so. We've seen too
many otherwise perfect components damaged in transit for lack of a proper shipping carton, so please:
Save that box!

CHOOSING A LOCATION

We hope you will agree that the S170i's finish-quality and appearance earn it pride of place in any home
theater or music system. Choose a location that is well ventilated (with at least several inches to both sides
and behind), and that will provide a clear line of sight, within 25 feet/8 meters, between the preamp's
front panel and your primary listening/viewing position to ensure reliable infrared remote control
communications. Due to the S170i's high-speed DSP hardware and high-current audio circuits it generates
a modest amount of heat, but nothing that should trouble any adjacent components. It is perfectly safe
to stack additional components atop the S170i, or vice versa, but it is probably preferable (and
considerably more handsome) if the S170i stands alone.
6