System Setup
Step 1: Set up the remote control
A. Slide the battery compartment cover off the back of the remote control.
AA (IEC LR6) batteries (4)
B. Install four AA (IEC LR6) batteries, matching the polarity markings (+ and –)
to the markings inside the battery compartment.
C. Slide the battery cover back into place.
Step 2: Turn your system on
A. Press the power button on the control console to turn on your system.
Because the system is in a low power state when in standby, it takes several
seconds to start. When the status indicator on the control console changes
from blinking to steady green, your system is ready to use.
Status indicator
Power button
16 - English
Battery compartment cover