Preparing The Appliance; Operation - Medisana FSS Instrucciones De Manejo

Sauna facial
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
3.1
Preparing
the appliance
3.2
Using the steam
attachment
for your face
3.3
Adjustable
steam valve
• Make sure the power cord is disconnected from the socket.
• Make sure the facial sauna is standing on a level, secure surface (such as a
table).
• Fill the water tank
never fill the tank directly from the tap.
• Do not use any liquids other than water.
• In hard water areas, it is advisable to fill half the tank with demineralised
(not distilled) water.
• Do not fill the water tank
• Fasten the steam attachment
turning it clockwise until you hear it catch.
• When completely filled
until the water has evaporated from the tank
• Plug the power cord into the socket.
• When the appliance is ready, switch it on using the ON/OFF button
red indicator lamp
steam comes out of it. You can switch the appliance off at any time using
the ON/OFF button
• Sit down in front of the appliance. Lean forward so that your face is over
the steam attachment
• Do not put your face too close to the steam attachment
a sufficient distance so that your skin does not become too hot.
• Do not use the steam attachment
pliance is used by several people in succession, each one should not use it
with the steam attachment
day. Do not use the appliance more than two or three times per week.
• If the water has evaporated or if you want to switch the appliance off, press
the ON/OFF button
• Unplug the power cord from the mains and let the appliance cool down for
at least 10 to 15 minutes before taking off the steam attachment
emptying the water tank.
• Take the steam attachment off the main appliance by turning it anticlock-
wise.
• Pour the remaining water out of the tank over a sink or basin.
• When you have finished using the sauna, wash your face with cold water.
Then apply your moisturiser to your face, or suitable cleaning or peeling
cream.
• You can turn the steam outlet plate
coming from the water tank.
• To shorten the heating time, you can close the steam outlet plate
turning it clockwise as far as it will go.
• When the steam outlet plate
valve
on the rear below the steam attachment.
• Never touch or cover the steam valve, as this can lead to scalding.
with tap water. Always use the measuring cup
higher than the maximum marking
(or
) to the main appliance
the appliance can be used for up to 20 minutes
lights up. The water is heated and in a few minutes
.
.
for more than 20 minutes. If the ap-
for more than 20 minutes in the course of a
. The red indicator lamp
to regulate the amount of steam
is closed, the steam escapes via the steam

3 Operation

.
.
. The
; always keep at
goes out.
GB
;
by
and
by
13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

88245

Tabla de contenido