Technical Data / Electrical Connection / Easyteach Chart; Technical Data; Electrical Connection; Easyteach Chart - Rechner Sensors I-Level KFI-1-ETW Instrucciones De Servicio

Technical Data

Electrical version
Output function
Operating voltage (U
B
Permitted residual ripple max.
Load resistance (R )
L
Power consumption max. (outputs no-load)
Analogue output
Permitted ambient temperature
Permitted ambient temperature (for probe with temperature
buffer (TP) between non-active range 2 (IB2) and 3 (IB3 )
LED-Display
Protective circuit
Degree of protection IEC 60529
Norm
Connection cable
*Where applicable. For further technical data: see data sheet
** Dependent on type

Electrical connection

Chart
LED green / Output Adjustment
16
)
Electrical connection:
• Disconnect the system from all power.
• Connect the probe according to the connection diagram.
• Switch power on.
Adjustment Min.
Adjustment Max.
Factory set
Test
5 wire DC
Analogue
15...30 V DC
5 %
≤ 400 Ω (≥ 2 KΩ)**
0.9 W
4...20 mA (0...10 V)**
-25...+70 °C
-25...+200 °C
Green
Built-in
IP 67
EN 60947-5-2*
2 m, PVC, 5 x 0.34 mm²